news 20 June 2017

How to ensure the effectiveness of collective protections

traffic signal

In our eagerness to improve the exercise of our profession as health and safety coordinators in the execution phase of the works, we have seen the need to analyze one of the functions referred to in RD 1627/1997: Coordinate the activities of the work to ensure that the contractors and, in their where appropriate, subcontractors and self-employed workers consistently and responsibly apply the principles of preventive action...

Among other measures, the employer must:

1. Adopt measures that put collective protection before individual protection

.

2. Give the proper instructions to the workers..., (among others)... The effectiveness of preventive measures must provide for distractions or reckless recklessness that the worker may commit. For their adoption, account shall be taken of the additional risks that may be involved in certain preventive measures, which may only be taken when the magnitude of those risks is substantially lower than those intended to be controlled and safer alternatives do not exist

.

And how to guarantee the effectiveness of the collective protections that are installed on a work site?

Based on the approved Health and Safety Plan, and the risk assessment of the different activities to be carried out, it will be easy to identify the collective protections to be installed. Even so, it is not always easy to identify how long they will be installed, what forecast they have, and if depending on the progress of the work they will have to be modified, or removed before their completion

.

First of all, it is important that the safety and health plan should not only identify preventive measures, but also define the planned time, the different modifications and effects depending on the progress phases of the work, and in case of elimination, even if it is eliminated, define what alternative protection will be applied that guarantees at least the same safety as the withdrawal. The collective option should be prioritized over the individual option whenever possible

.

Once the collective protections have been identified, it is important to verify their correct choice and installation, since the mere presence of the element does not imply a protection in itself. It is necessary that the elements used comply, on the one hand, with minimum resistance in terms of the materials from which it is made. The current regulations must be followed, guaranteeing their minimum quality for marketing with the CE marking, and coded with the UNE that apply and that guarantee that the elements used meet requirements verified through a series of standardized tests that guarantee their adequate performance as collective protection for which it

has been designed.

It will be essential to verify the correct installation of the elements, following the regulations, and the instructions provided by the manufacturer or supplier. For such installation, it will be necessary that the personnel carrying it out have the necessary training and information, and sufficient experience for its implementation, knowing the assembly instructions and the appropriate procedure to avoid risks at all times, including the process of its installation. For example, in the assembly of jib nets, temporary supplementary systems and even individual protections may be required during their installation, for which the operator must be

trained and trained.

A correct installation is as important as a good maintenance of the collective protections, which must be carried out periodically, guaranteeing that both the installation and the materials, anchors, etc. have not been modified or deteriorated and verify the expiration dates of the different elements.

Another critical moment is the withdrawal of protections. In many cases the removal of the protection is done after the elimination of the risk they protected, in which case there is no problem with its removal. In other cases, removal is necessary before eliminating the risk, for example to carry out an exterior enclosure in a building, or we may have protections that must be removed once the work is finished, but which have difficult access, so it is necessary that their removal be carried out by qualified personnel with sufficient specific training, and with experience, such as the removal of an edge net on a roof

.

Finally, we can find ourselves in works where the materials used for the installation of collective protections are not supplied by a manufacturer who guarantees us a certificate and an installation system, but “an element of protection is engineered”. In this case, it is very difficult to ensure that the installed protections meet the standard requirements and we continue to expose workers, and even aggravate it and therefore not guarantee

the effectiveness of preventive measures.

Sergio Lopez
Teresa Mª Cano Rodriguez
E-scentia Team