We recommend 08 July 2016

Liability coverage for manufacturers and suppliers

Civil Liability Coverage

Manufacturers and suppliers of construction products: the importance of having adequate liability coverage.

During the development of his activity, the employer may inadvertently cause damage to third parties that may affect his assets, so adequate insurance coverage is essential. Indeed, the employer is liable both for claims arising from work accidents of his employees, and for claims for damage to third parties once the product has been delivered (shingles, riots, collapse of part of a forge due to defective concrete)

.

In this regard, it should be borne in mind that compensation for bodily harm has increased substantially since 1 January 2016, with the entry into force of the new Body Damage Assessment Scale (Law 35/2015, of 22 September).

On the other hand, once the product has been delivered, it may be defective, before or after being incorporated into another product or in the work, thus generating a loss for the customer, who can claim the manufacturer or supplier.

Usually the insurance market covers manufacturers and suppliers for their civil liability for damages to third parties, both before and after delivery of the product, but always excludes the cost of the defective product, so the manufacturer's commercial guarantee is rarely covered by insurance.

To respond to this coverage gap, Asefa Assegurances has launched a new civil liability product (Product Pack Plus) that, in addition to offering a General Liability policy with extended coverage, covers material damage to the works that affect the entity/habitability and the consequential damages, as well as the cost of the product itself, with a coverage innovative in the market and that adds value to the manufacturer's own product guarantee.

What types of claims are covered by this insurance?

On the one hand, claims that the employer may receive as a result of material or personal damage, such as work accidents of his employees during the manufacturing process, or for damage to third parties once his product is delivered as we saw previously, would be covered.

On the other hand, once the product has been delivered and before its incorporation into the work, if the manufacturer detects a defect in the product, the costs of locating, removing, transporting and destroying the product are covered.

Finally, when the product has been incorporated into the work, if it is defective as a result of an error or omission in the design, manufacture or storage, both the costs of dismantling, assembly, repair, replacement are covered, among which the cost of the defective product is included.

As an example, we list 3 situations of entry into insurance coverage:

1. Bricks: in the event that there was a batch of bricks that, once incorporated into the work, turns out to be defective due to some error or omission in the manufacturing process, the expenses of repairing and replacing the brick again will be covered, paying for the non-defective brick

.

2. Concrete: if after executing the foundation, on the pillars of the ground floor of a building and the forging, it is detected that the mechanical capacity of the concrete supplied is insufficient, the insurance covers the expenses for dismantling the forge, demolishing the pillars, construction of new pillars and the roof (labor, cranes...), incl. cost of defective concrete

.

3. Windows: if, once incorporated into the work they do not close properly and need to be changed, once it is detected that the defect is at the manufacturing level, the cost of the windows is covered, in addition to the repair and replacement costs

.

With this coverage, value is added to the manufacturer's own commercial guarantee during the periods of responsibility established in Law 38/1999, of November 5, on Building Management, Civil Code and RDL 1/2007 on the Defense of Consumers and Users.

Jori Armengol & Associates
Corredoria d'Assegurances S.A

.